Only Factory Direct

Compact, Ultra-Lightweight systems...Performance You Can Trust!

The JBL PRX635 defines powerful and delivers sonic accuracy and peak SPL. The JBL PRX635 is stocked with a 1500 Watt Class-D, Crown digital amplifier but forget about the watts, "Maximum Sound Pressure Levels" are the best indication of the potential in a powered speaker and all PRX600 Series excel in this critical specification with a whopping 135dB, JBL's ability to maximize the speaker and amplifier performance guarantees ample power, accurate dynamics and sonic purity. We encourage you to turn up the PRX635 and compare them to any speaker in their class. The JBL PRX600 Series deliver it loud and clear all night long.

You will love the versatility of the new PRX models. Professionally distinct design and superior performance in an affordable package makes these speakers appealing to musicians, entertainers, A/V Rental Companies, and especially to commercial facilities. The reduced size and weight gives musicians and performers the portability they need.

The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

• 1 Powered JBL PRX635 Monitor Speaker
• Maximum SPL 135 db peak
• 380 mm (15 in) Differential Drive dual voice-coil and magnetic gap, neodymium woofer
• 165mm (6.5 in) horn loaded midrange transducer
• 25.4mm (1 in) polymer diaphragm compression driver
• 1500 Watt (3 x 500 watt) Class-D, Crown digital amplifier
• DSP input section with dbx Type IV limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and 1/4" Mic/Instrument inputs, with loop through
• Obsidian DuraFlex coated plywood construction
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
• 8 M10 Suspension points and 1 pullback point
• Integrated 36mm pole mount socket
  
  Specifications
  
  
• System Type : Self-powered 15", three-way, bass-reflex
• Maximum SPL Output : 135 dB peak
• Frequency Range (-10 dB) : Flat: 41 Hz – 19 kHz / Boost : 40 Hz – 19 kHz
• Frequency Response (±3 dB) : Flat : 53 Hz – 18 kHz / Boost : 50 Hz – 18 kHz
• Coverage Pattern : 90º x 50º nominal
• Amp Design : Crown Class D
• Power Rating : 1500 W ( 3 x 500 )
• Dimensions (H x W x D) : 921 mm x 424 mm x 413 mm ( 36.29 in x 16.71 in x 16.27 in )
• Net Weight : 27.2 kg ( 60 lb )
  
  Applications
  
  
• This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with extended low frequencies of the PRX618S-XLF, one experiences complete control over the entire audio spectrum. These cabinets can be stand-mounted but do require a large footprint tri-pod type stand. When pole mounting the PRX635 on a subwoofer we highly recommend a pole no longer than 24” (SS3BK-24 or SS4BK-24) to ensure stability and safety. As with all the full-range PRX600 Series systems two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
• The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth. The PRX635 is comprised of one 380 mm (15 in) 265F Differential Drive woofer, a 165 mm (6.5 in) 195H horn-loaded 90° by 50° mid-range and a 2414H 25.4 mm (1 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt (3 x 500) Audio Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
• The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.
• All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
  
  
• This Price is for 1 New JBL PRX635 Powered Monitor Speaker