Only Factory Direct

Crown XTi 1002 Power Amp 1400 Watt Stereo Amplifier XTi1002

Crown's XTi1002 Power Amp is perfect for smaller venues. Crown builds powerful innovative amps with the most expansive fault protection in the industry and the XTi Series comes with a 3 Year NO FAULT WARRANTY!

That makes the Crown XTi 1002 a smart buy for a performer that is still performing in smaller venues and coffee houses, or a DJ with smaller weddings and parties.

The XTi offers cutting edge features such as 15 selectable presets, and tonal enhancements which can be customized to the user's liking or disabled all together. The XTi Series also features awesome digital customization, like equalization, volume limiting, and delay. Don't forget updated HiQnet Band Manager & System Architect control software and System monitoring via software to visibly monitor the AC line voltage and power supply temperature. Tooo Cool!

One Final note, although we pride ourselves on our customer service including tech support, if you buy a Crown Amplifier they actually pick-up the phone and a knowledgeable Crown Technician will support and troubleshoot your set-up. That my friends is worth it's weight in gold. Finally back that up with OnlyFactoryDirect.com's 30-day No Hassle Guarantee and Free Shipping (main 48) and well..you can't go wrong buying a Crown XTi Series amp from us.

• Crown XTi 1002 Power Amp 1400 Watt Stereo Amplifier XTi1002
• Stereo, 2 ohms (per ch.) = 700W
• Stereo, 4 ohms (per ch.) = 500W
• Stereo, 8 ohms (per ch.) = 275W
• Bridge-Mono, 8 ohms = 1000W
• Bridge-Mono, 4 ohms = 1400W
  
  Integrated Processing
  
• Input EQ = 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.
• Crossover Filters = Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.
• Output EQ = 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.
• Delay = For signal alignment of driver; 50 mS of total delay.
• SubHarmonic Synth = Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.
• Peakx Plus Limiter = User defeatable limiter that allows users to control Threshold, Attack, and Release times.
• Presets = 50 total presets, 49 of which are user-definable.
  
  Performance
  
• Sensitivity (for full rated power at 4 ohms) = 1.4 Vrms
• Frequency Response (at 1 watt, 20 Hz - 20 kHz) = +0 dB, –1 dB
• Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms) = 100 dB (A weighted)
• Total Harmonic Distortion (THD) = < 0.5%
• Damping Factor 20 Hz to 1 kHz = > 500
• Crosstalk (below rated power) = 20 kHz - 1 kHz: > 70 db
• Input Impedance (nominal) = 20k ohms balanced, 10k ohms unbalanced
• Maximum Input Signal = +22 dBu typical
• AC Line Voltage and Frequency Configurations = 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
• AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) = 6.8A; no more than 38W at idle
• Operating Temperature = 0°C to 40°C at 95% relative humidity (non-condensing)
  
  Controls
  
• Level = Two front-panel rotary level controls, one for each channel
• Power Switch = On/Off switch applies AC power to the amplifier
• Sel/Prev/Next Buttons = Three buttons near the LCD screen that are used to access menu items and front panel lockout
• LCD Screen = Backlit liquid crystal display that shows preset and processing status
  
  Indicators
  
• Signal Indicator = Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
• –10 Indicator = Green LED flashes when output signal exceeds -10 dB below clip.
• –20 Indicator = Green LED flashes when output signal level exceeds -20 dB below clip.
• Ready Indicator = Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
• Clip Indicator = Red LED, one per channel, turns on at the threshold of audible distortion
• Temp Indicator = Red LED, one per channel, illuminates under excessive temperature conditions
• Power Indicator = Blue LED illuminates when the amplifier has been turned on and has power
  
  Input/Output Connectors
  
• Input Connectors = XLR, one per channel
• Link/Out Connector = Loop-thru signal from input connector for linking another amplifier, one per channel.
• Output Connectors = Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
• HiQnet USB Connector = Type B, connects to HiQnet network.
  
  Construction
  
• Chassis = Steel
• Front Panel = Cast-aluminum
• Cooling = Proportional speed fan with front-to-rear airflow.
• Dimensions = 19" (W) x 3.5" (H) x 12.25" (D)
• Net Weight = 18.5 lbs (8.4kg)
• Shipping Weight = 21.5 lbs (9.8kg)
  
  
• This Price is for 1 Brand New Crown Power Amp

XTi
There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Next Generation Features: