Only Factory Direct

XLS2500 Crown amp from the XLS Series is a serious performer! The brand Crown is synonymous with reliability and power in the audio world. Crown held nothing back when designing the XLS2500 partnering with technological giants like Texas Instruments to develop the XLS Series Integrated DriveCore Technology placed at the very core of the amplifier. Touring musicians and mobile audio DJs will appreciate the mere 12 lbs versus it's competitors 40 lb model making it easy to move from show to show.

Enormous Power
The Crown XLS2500 is equipped with an extraordinarily high efficiency Class D amplifier perfectly suited for driving difficult reactive loads such as subwoofers. Crowns DriveCore technology provides an extremely wide tolerance with regards to sagging or "dirty" AC line conditions, providing consistent performance without affecting audio quality. Plugging into a generator not a problem, no worries about overloads from lighting. A proprietary hybrid analog-digital integrated circuit (IC) drives the "front end" of the Class D output stage, resulting in some truly remarkable benefits. Including a whopping 2,400 watts of power.

Generating chest-thumping lows and crystal clear highs, the XLS2500 is engineered to meet any demanding audio requirements – reliably and within budget.

Integrated Peak-x Limiters
Providing the maximum output while protecting your speakers, the XLS Series Amps all have Crowns exclusive Peak-x limiters. The Peak-X Clip Limiters provide your amplifier and system provide your system with the protection it needs to perform at its peak. The Clip limiters allow your amp to achieve a higher SPL with less cracks, pops, or undesirable artifacts, protecting your speakers and ultimately delivering the clean sound you need for a professional performance. Easily turned on or off from the front panel.

Four Cross Over Modes to Choose From
The PureBand Crossover System in the Crown XLS Series adds the flexibility because on the XLS2500 it is completely variable. Choose any crossover point between 50Hz and 3kHz on 1/12 octave centers. The PureBand Crossover System uses a Linkwitz-Riley filter. The Linkwitz–Riley filter has a −6 dB gain at the cutoff frequency. This means that summing the low-pass and high-pass outputs, the gain at the crossover frequency will be 0 dB, so the crossover behaves like an all-pass filter, having a flat amplitude response with a smoothly changing phase response. Ultimately, assisting you in managing peaking and cancellations.

3-Year No-Fault Warranty
This warranty covers everything and is the best in the industry.

Crown has 50 years of experience designing and building rock-solid products, and now you can buy it with our 30-day "No Hassle" Guarantee, Free Shipping in the main 48 states, and if you buy it today before 5pm EST M-F, it ships today!

MX1204 12 Channel Mixer
This Podium Pro Audio MX1204 audio mixing console brings premium quality audio processing into the compact desktop class of mixers. Carefully designed signal routing, phantom microphone power, full balanced design and versatile effects loops allow this console to provide un-matched performance and flexibility. The MX1204 features include four studio grade "invisible" ultra low noise microphone (MIC) preamps, four balanced line inputs, direct-coupled signal processing and a rugged steel construction that provides superior noise shielding. All channels have high, mid, low, aux and level control knobs. The four mic channels have additional gain control knobs and pan control knobs. Channels 5/6 and 7/8 have additional balance control knobs. Aux return, headphones and main mix control knobs round out some of the amazing features of this pro audio mixer.

Podium Pro Audio Passive 3-way Speakers
The Podium Pro Audio "C" series speakers are an entry-level 3-way speaker, and can be teamed with any powerful amp to make a good quality PA package. All "C" series speakers provide great sound and great power handling without breaking the bank. The Podium Pro Audio speakers also provide clip connectors as well as dual 1/4-inch input jacks for easy connection. For performers that require a cost-effective solution for speakers, the "C" series of wood cabinets is perfect.

• Four Podium Pro Audio Passive Speakers
• Four Passive Speakers 12" 3-Way Cabinets
• 500 Watts RMS per pair & 1000 Watts Max
  
• Sensitivity is 92dB with 32-30,000 Hz Frequency Response
• Terminal Has Two 1/4" Jacks and Raw Wire Connectors
• Constructed with High Quality 3/4" MDF Wood
• Deluxe Steel Woofer Grills
• Dimensions are Height 27" x Width 15" x Depth 11.75"
• Woofer is a Deluxe 12" 8ohm Poly-Treated Wide Dispersion Driver
• Midrange is a Deluxe 5" Kapton & Tweeter is 3" x 7" Horn
• Speaker Mount for Pole Speaker Stand
• Heavy Duty Solid ABS Side Handles
• Impact-Forgiving Black Carpet


• • Crown XLS2500 Power Amplifier
  • Stereo, 2 ohms (per ch.) = 1200W
  • Stereo, 4 ohms (per ch.) = 775W
  • Stereo, 8 ohms (per ch.) = 440W
  • Bridge-Mono, 8 ohms = 1550W
  • Bridge-Mono, 4 ohms = 2400W
    
    
  • Total Harmonic Distortion (THD) = < 0.5%
  • Intermodulation Distortion (IMD) = (60Hz and 7kHz at 4:1) From full rated output to -30dB: <0.3%
  • Damping Factor (8 ohm): 10 Hz to 400 Hz = > 200
  • Crosstalk (below rated 8Ω power) = At 1kHz: > 85dB / At 20kHz: >55dB
  • Input Impedance (nominal) = 20 kΩ balanced, 10 kΩ unbalanced
  • Load Impedance = 2 to 8 Ω per channel in Stereo / 4 to 8 Ω in Bridge Mono
  • AC Line Voltage and Frequency Configurations Available (± 10%) = 120 VAC 60 Hz / 100 VAC 50/60 Hz / 220 and 240 VAC 50 Hz
  • Ventilation = Flow-through ventilation from front to back
  • Cooling = Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
  • Air Volume Requirements (per minute per unit) = 80.15 ft³ (2.27 m³)
  • Integrated Processing = PureBand Crossover System
    Crossover Filter: Linkwitz-Riley 24dB per Octave
    Crossover Frequency Range: 50 HZ - 3 kHz
    Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
    Peakx limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
  • Input/Output = Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
    Output Connectors: Two 4-Pole Speakon Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector.
    One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
    
    
  • Construction = 10.35-Inch (26.29cm) depth
  • Dimensions = EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height.
    10.7-inch (27.2-cm) depth.
  • Net Weight , Shipping Weight = 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
    
    
  • Podium Pro Audio MX1204 Mixer
  • 1 Podium Pro Audio MX1204 Mixer
  • Ultra-compact 12-channel mixer with Rugged Steel Enclosure
  • 4 Studio Grade "Invisible" Ultra Low Noise Mic Preamps
  • 4 Balanced Line Inputs
  • Direct-Coupled Signal Processing
  • Either XLR or 1/4" Mic Input Connections
  • 1/4" Line and Stereo Connections(4 Mono Channels)
  • +48 Volt Mic "Phantom" Supply
  • LED VU Meter
  • Main Mix Faders
  • Alt 3-4 Faders
  • XLR Main Outputs
  • 1/4" Control Room Outputs
  • 1/4" Headphones Output
  • RCA Tape Inputs and Outputs
  • 1/4" Stereo Aux Return
  • 1/4" Aux Send
  • Sleek, Rugged Steel Chassis
  • 2 Professional Audio Telescoping Speaker Stands
  • Adjustable Height from 44 inches to 58 inches
  • Two 30 Foot Speakon to 1/4" Jack Speaker Cables
  • Two 6 Foot Female XLR to Male XLR Mixer Cables
  • Two 1/4" Speaker Cables
  • 1 F50 Audix Microphone
  • 1 Microphone Cable
    
    
  • This Professional Audio Equipment Package includes Four Podium Pro 1000C Speakers, 1 XLS2500 Crown Amplifier, 1 MX1204 Mixer, 4 PSS1 Stands, 1 pair pack of 2TSSP30 Speaker Cables, Pair of 2TSM25 1/4" Speaker Cables, and 2 XLR6 Cables,1 F50 Audix Microphone, 1 X25 Microphone Cable